Bike care: When riding a bike, we make many small mistakes that we are not aware of, but which have a negative impact on the engine and other parts of the bike. How long the bike’s engine performs better also depends on how we start or stop the bike.

Many bikers often repeat such mistakes when starting the motorcycle in the morning, causing the engine to respond prematurely. Due to these errors, the mileage of the bike also decreases and there is a possibility of engine failure. Today we will tell you about some common mistakes when starting the bike that most people do not pay attention to. Let us know…

1. Start riding as soon as you start the bike
Most cyclists make this mistake every day. Let us tell you that the engine oil accumulates in the lower part of the engine when the bike is left parked overnight. At this point, the engine parts are less lubricated. If you start the bike immediately and start riding, many parts in the engine may wear out and be damaged due to less lubrication. Doing this repeatedly can cause engine problems in the long run. So if you are riding a BS-6 bike, after standing the bike for 6-7 hours, leave the bike in idle mode for 10 seconds. If it is a BS-4 bike, give the engine at least 15 to 20 seconds to warm up.

2. Organize more races after the start
If the bike sits idle for 5-6 hours, there is a lack of lubrication in the engine. In such a situation, if the motorcycle is ridden too frequently after starting, the likelihood of engine parts becoming worn out increases. Excessive racing uses more oil unnecessarily, reducing mileage. Remember that when starting the bike after a long time, you should not race too much. Give the engine just enough revs to keep the bike from stopping, or allow the engine to warm up without revving it.

3. Racing your bike too much
After starting, you should not let the bike run at high speed for a long time. The bike should not be ridden immediately. When you start the bike again after a long time, keep the speed at 25-30 km/h for some time. This keeps the engine well lubricated and reduces the risk of wear on the internal parts. After 15-20 seconds, the speed of the wheel can be increased as needed.

Tags: car news, Car Bike News